-
About UsShijiazhuang Xuda Safety Tools Co., LTD. which was established in 1986 , is a professional factory to produce non-spark safety tools in China. Professional technology, advanced producing equipment, scientific processing technique and perfect checking measure guarantee the best quality of xinda non-spark safety tools.
-
ProductsThere are 10 categories,more than 180 series and thousands of types of the tools, all of products are made of Aluminum bronze or beryllium copper, the products have the feature of high rigidity, good tenacity.
-
NewsXinda always sticks to the following enterprise principle:"develop by quality, treat the customers with honesty and credit".We hope that our products can provide more safety and convenience to all of the customers and we welcome all the friends at home abroad to Xinda.
-
ServiceWe can also design and produce the special type products as the customer’s requirement. Xinda always sticks to the following enterprise principle:"develop by quality, treat the customers with honesty and credit". We hope that our products can provide more safety and convenience to all of the customers.
FAQs
Maintenance Instructions about non sparking tools
1.Remove oil on the surface of various products before use.
2.Remove dirt and deposits on the surface after use and store in a dry and safe place.
3.Striking tools should not be used continuously. There should be an appropriate interval more than ten times and the detritus on the product should be removed in time before continuing to use.
4.Wrenches are not allowed to be used with excessive force, nor can they be extended by using sleeves or other metal rods to extend the arm, or by hammering (except for striking wrenches) to turn fasteners.
5.Cutting edge tools should be placed in the water tank to lightly touch the grinding wheel for sharpening. Do not use excessive force and contact the grinding wheel for a long time.
6.In the actual operation of the striking tools, it is necessary to remove the debris on the site and the corroded oxide on the working surface in case of third party striking.
Request Quote